TechKnowSurge
Cisco CCNA 4.1
InteractiveNetworkFree

NAT Translation Outcome Predictor

Predict what a NAT router does with a packet: which address it uses, which port, and what fails when a pool runs out.

⚑ Complete this interactive to capture a CTF flag worth 5 points.

About this interactive

From the lesson: - **Static NAT** is a fixed one-to-one mapping between an inside local and an inside global address. It works in both directions, so outside clients can reach the server: the destination is translated on the way in and the source on the way out. - **Dynamic NAT** hands out a pool address to a host that needs one and takes it back when the translation clears. It is one-to-one too, so a pool of two serves two hosts at a time, and a server on a pool has no fixed public address. - **PAT** also translates the Layer 4 port, so many hosts share one address and each session is told apart by its port. When two hosts use the same source port, one is moved to another free port; when an address runs out of ports, the next pool address is used. ICMP, which has no ports, uses its query ID. - **Static PAT** maps one port on a public address to one port on an inside host, which is a home router's port forward. A non-standard external port gets scanned less. - **Nothing comes in unasked:** a dynamic entry exists only because an inside host started a session.

What you'll learn

Aligned to

Cisco CCNA
4.1 Configure and verify inside source NAT using static and pools

Key terms

Static NAT
A one-to-one mapping between a single inside local IP address and a single inside global IP address, configured with the ip nat inside source static command.
Dynamic NAT
A NAT configuration that uses an ACL to identify inside local addresses and a NAT pool to supply the global addresses they are translated to.
Port Address Translation
PAT
A form of NAT that maps multiple devices on a private network to a single public IP address by differentiating each connection using unique source port numbers. PAT is the most common NAT implementation and is what enables an entire home or office network to share a single public IP address.
Static NAT Port Forwarding
A permanent, one-to-one mapping on a router that directs inbound traffic arriving on a specific public IP and port to a designated internal IP address and port.
NAT Pool
A named range of public IP addresses configured on a Cisco router that dynamic NAT or PAT draws from when translating inside local addresses to global addresses.
NAT Table
A translation table maintained by a NAT-enabled router that records mappings between inside local and inside global addresses to ensure return traffic is correctly forwarded.
Inside Local
The private IP address assigned to an inside host as seen from within the local network, found in the IP header before translation.
Inside Global
The public IP address that represents an inside host to the outside world, found in the IP header after translation.

Topics

Nat Pat Static Nat Dynamic Nat Port Forwarding Interactive Predict

About TechKnowSurge

TechKnowSurge builds IT and cybersecurity professionals through hands-on, concept-first training built around real understanding — not memorization. Free interactive tools, structured programs, and 25+ years of real-world experience, all in one place.

Explore free tools and programs →